preloader
cart 0

ZERO FIGHTER (Kamikaze Collection)

€50.00

Zero Fighter is a professional-grade, water-based, VOC-free polishing compound formulated to correct deep scratches (up to 1500 grit level), bird etch, and embedded surface defects with minimal dusting. It contains precision alumina abrasives, offers fast cutting action, and delivers a refined, smooth paint finish.

Categories: ,

Application procedure

Certification required: Intended for trained detailers only. Professional knowledge of abrasive polishing is necessary.
Prep: Clean, wash, and dry panel. Lightly wipe with panel wipe or IPA to remove any contamination.
Select pad: Use Kamikaze’s Banzai Dynamics Black Hybrid Wool Pad (#1500) for maximum cut; or Russo buff pad for moderate one-step polish.
Apply: Place Zero Fighter on a foam or wool pad and work on small sections, starting on low speed to refine and then increasing as needed for cut.
Use straight strokes: Employ overlapping passes in linear motions—no swirling. Maintain pad flat and consistent pressure.
Check skin effect: After each section, inspect under bright light. Pads should gently change the skin texture (~50–60%) without removing too much clear coat.
Clean residue: Use high-quality microfiber towel to remove polish residue. If hazing or swirl appears, re-blend using minimal pressure.
Optional follow-up: After heavy correction, refine with a finishing polish like Ichiban or Miyabi for optimal gloss.
Wash & prepare: Post-polish, wash again and degrease before applying any ceramic coating.

Related products