Application procedure
Prep & Clean: Thoroughly clean leather surfaces using a dedicated leather cleaner (e.g. Gyeon Q2M Leather Cleaner) and brush. Ensure the leather is completely dry before proceeding.
Apply: Shake if needed, then place an appropriate amount of coating onto a microfiber applicator pad or coating finger mitt. Apply using straight, linear strokes only—avoid zigzag or circular motions to prevent uneven coating.
Wait 2–3 minutes: Allow the coating to level and bond.
Wipe off excess using a clean microfiber towel (e.g. Edgeless 300) after the wait time.
Optional build-up: To minimize gloss and enhance film thickness, wipe immediately post-application and reapply after ~1 hour in thin layers.
Drying: Avoid exposing the leather to any moisture (water, humidity) for at least 3 hours after application.
